|
Build Your Online Product Catalogs?
Product Name: |
X-ray GeneratorXRG
|
Supply Ability: |
10000 |
Related proudcts |
x-ray generator, |
Specifications |
X-ray Generator |
Price Term: |
FOB |
Port of loading: |
|
Minimum Order |
|
Unit Price: |
|
|
SUMMARY Wisman¡¯s XRG Series of X-ray generators are well regulated high voltage power supplies with output voltages to 130kV and very low ripple achieved through the use of advanced resonant conversion techniques. Extremely stable voltage and emission current outputs result in significant performance improvements over previously available technology. The XRG Series provides all the power, control and support functions required for X-ray applications including a regulated dc filament supply. These units incorporate local and remote programming, monitoring, safety interlock, short-circuit and overload protection. TYPICAL APPLICATIONS Plating Measurement Mineral Analysis X-ray Fluorescence OPTIONS AX: Arc Trip SS(x): Non-Standard Slow Start L(x): Extra Length HV Cable ACF:FLOATING FILAMENT SUPPLY SPECIFICATIONS Input Voltage: 115Vac¡À10%, 50-60Hz single phase or 220Vac¡À10%, 50-60Hz single phase. Voltage and Current Control: Local:continuously adjustable from zero to maximum rating via a ten-turn potentiometer with a lockable counting dial. Remote: 0 to +10Vdc proportional from 0 to full output. Accuracy: ¡À1%. Input Impedance: 10Mohm. Filament: Specify at time of order: FH: 9A, 3V. FL: 3A, 3V. Preheat level is 0.45 amps in standby Voltage Regulation: Load: 0.005% of full output voltage no load to full load. LIne: 0.005% for input voltage range change. Current Regulation: Load: 0.05% of full current ¡À100¦ÌA from 0 to full voltage. Line: 0.05% of rated current over specified input range. Ripple: 0.03% rms below 1kHz. 0.75% rms above 1kHz. Temperature Coefficient: 100ppm/℃. Stability: 0.01%/8 hrs after 1/2 hour warm-up. 0.02% per 8 hours (typical). Cooling: Free air convection. Metering: Digital voltage and current meters (3.5 digits), 1% accuracy. HV Output Cable: 10¡¯ (3.3m) of shielded HV cable removable at rear. I/O Connectors: 25 pin D-type for control interface with mating connector provided. Dimensions: 30 to 60kV: 3.5¡±H x 19¡±W x 19¡±D (8.9cm x 48.3 |
Company: |
Wisman High Voltage Power supplies Corporation
|
Contact: |
Ms. liucong Sales Manager |
Address: |
Technology Road 65,High-tech District |
Postcode: |
710075 |
Tel: |
86-18161945231 |
Fax: |
029-33693482 |
E-mail: |
|
|
|
|